BladeRight are pleased to offer Finance, from as little as £500:00, via Oxford Funding.

Search
Close this search box.

PUMP UP XL BOX FOR CHEMICAL APPLICATION

£458.33£550.00 ex. VAT - £550.00 inc. VAT

Portable heavy duty chemical pump box for exterior cleaning specialists who are looking to apply pre-mixed required ratio biocides, soft washing sodium hypochlorite and TFR etc to exterior surfaces. Remove moss, algae, and lichen from hard surfaces, roofs, walls and render.

The box includes the chemical inlet hose, charger whether you choose to have the 50Ah battery included or not and also features a storage tray for those applicators, fan jets, full cones and other required spray nozzles and accessories.

CONTROLLER CALIBRATION
Please consider that in variable conditions and situations, calibration should take place on each set up.

  1. To prime the pump ensure valves are open on lance/poles. Turn the flow rate to 99, once the chemical feed has filled and the line has primed, turn down the flow rate to to 20-35.
  2. Now that you have set the controller to a medium rate of 20-35 leave the flow open and auto calibrate the controller to the desired flow rate.
  3. If any parameters change ie the jets in the brush (fan/pencil), applicator nozzles, diameter or distance of the hose then recalibrate accordingly for the best efficiency.
  4. Close the lid when in operation.
  5. Finally with fresh water flush the pump and chemical lines to provide your equipment with longevity.
SKU: N/A Category:

Description

Specific features
V16 Controller (Please scan the QR code on the controller for calibration prior to using)
Allows you to vary the pump flow rate from 0-99%. Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead-end has been removed. Indicates when the pressure switch has operated, and also the battery condition (voltage). Auto calibration. IP65 box. Supplied with chemical inlet hose, connect your own hose to outlet.

Pump
12v
5.6 Lpm Pump
100 Psi/6.8 Bar
Self priming
Run dry capable
Viton seal pump

Battery
12v, 50Ah
Wet Cell Flooded Lead Acid Battery with Advance Calcium+ Alloy Technology
Please charge battery fully before first use

Charger
5Ah
6-12v
SAE Crocodile connectors and O ring terminal crimps

Dimensions and Weight Specifications
Box measures 47cm (W) x 38cm (D) x 31cm (H)
Without battery 6kg
With battery 14kg

Inlet top
Outlet Bottom
Charge port on the rear.

Premix

Additional information

WeightN/A
Include Battery

No Battery Required, Yes Please